Stores

Charging and checking the battery

Each time you power on your speaker, the battery indicator displays the battery charge level for two seconds, and if enabled, a voice prompt announces the battery charge level.

To hear the battery charge level while using your speaker, press and hold the Power
button until you hear a voice prompt.

To visually check the speaker's battery charge level, press and hold the Power button while viewing the battery indicators.

○○○○0–20%
••○○○20–40%
•••○○40–60%
••••60–80%
•••••80–100%

Charging the speaker

Plug the small end of the USB cable into the USB connector.

Plug the other end of the USB cable into a wall charger or computer that is powered on.
While charging, the last lit battery indicator blinks white. When the battery is fully charged, all five battery indicators glow solid white.

Allow up to four hours to fully charge the battery. A full charge powers the speaker for up to six hours.

Battery protection mode

When your speaker is unplugged and unused for more than three days with a remaining charge of less than 10 percent, it enters battery protection mode to preserve battery power. To reactivate your speaker, connect it to a wall charger or computer that is powered on.

When not in use, store your speaker in a cool place.