We're Excited to welcome you at our Newly renovated Connaught Place Store, so if you’re nearby, stop by.

Enabling standby (low power) mode

You can enable standby (low power) mode by removing the Ethernet cable, disabling Wi-Fi and clearing the Bluetooth® pairing list. Disabling Ethernet and Wi-Fi will prevent the system from connecting to your network, as well as preventing the system from being controlled by the SoundTouch® app until Ethernet and Wi-Fi are re-enabled.

Disable Wi-Fi: On the console, press and hold the Source button for 10 seconds and release

Deactivate Bluetooth: Deactivate by clearing the pairing list via the on screen menu or the remote screen

Within 2.5 hours, the unit will enter standby mode

To re-enable Wi-Fi, press and hold the Source button for 10 seconds. Reactivate Bluetooth by pairing with a Bluetooth source

Was this helpful?


Thank you for submitting your comments.