We're Excited to welcome you at our Newly renovated BOSE STORE, HIGH STREET PHOENIX MUMBAI, so if you’re nearby, stop by.
 

Enabling standby (low power) mode

Applies to:

You can enable standby (low power) mode by deactivating Wi-Fi, clearing the Bluetooth® pairing list and disconnecting the Ethernet cable. Deactivating Wi-Fi and removing the Ethernet cable will prevent the soundbar from connecting to your network, as well as preventing the system from being controlled by the Bose Music app until Wi-Fi is re-enabled or the Ethernet cable is reconnected.


Note: Prior to deactivating networks or entering standby mode, use the microphone on/off button to ensure the microphone is turned on (the red indicator light will be off).

Wi-Fi: Deactivate by pressing and holding the Bose Music and Skip forward buttons on the remote simultaneously. Repeat to activate

Bluetooth: Deactivate by clearing the pairing list. To deactivate, press and hold the Bluetooth button on the remote for 10 seconds. Activate by pairing with a Bluetooth source

Ethernet: Deactivate by removing the Ethernet cable. Reactivate by inserting the Ethernet cable

Within 2.5 hours of deactivating the networks, the soundbar will enter standby mode

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided