Stores

Enabling standby (low power) mode

You can enable standby (low power) mode by removing the Ethernet cable, disabling Wi-Fi and clearing the Bluetooth® pairing list. Disabling Ethernet and Wi-Fi will prevent the system from connecting to your network, as well as preventing the system from being controlled by the SoundTouch® app until Ethernet and Wi-Fi are re-enabled.

Disable Wi-Fi: On the speaker, press and hold "3" and Volume down until the Wi-Fi indicator turns off

Deactivate Bluetooth: Deactivate Bluetooth by clearing the pairing list. Press and hold the Bluetooth button on the speaker until the Bluetooth indicator blinks white

Within 2.5 hours, the unit will enter standby mode

To reactivate Wi-Fi, press and hold "3" and Volume down until the Wi-Fi indicator turns on. Reactivate Bluetooth by pairing with a Bluetooth source