We're Excited to welcome you at our Newly renovated BOSE STORE, HIGH STREET PHOENIX MUMBAI, so if you’re nearby, stop by.
 

Adjusting Acoustic Noise Cancellation

Using the control module

Acoustic Noise Cancellation reduces unwanted noise to provide clearer sound from the headset. You can adjust noise cancellation based on your listening preferences and environment.

The first time that you power on your headset, noise cancellation is fully enabled. You can adjust the amount of noise cancellation with the ANC switch on the control module:

Control module showing the LOW, MED and HIGH settings of the ANC switch

HIGH: Set the switch to "HIGH" for maximum quiet and noise cancellation across the entire spectrum. Best signal to noise ratio for radio and intercom communications.

 

MED: Optimised mode for quieter aircraft.

 

LOW: Best for interpersonal communication.

Using the Tap Control

Note: By default, Tap Control is disabled. To enable Tap Control, see Setting the control module operation switches.

When you need to focus on communication in the aircraft that is not coming through the intercom or via a Bluetooth connection, you can automatically set noise cancelling to Low for a single earbud by double tapping that earbud.

Double tap the earbud again to set noise cancelling in both earbuds to the Acoustic Noise Cancelling switch level—or move the control module switch to another position.

Additional notes:

  • Tap Control is not a touch control feature. You must firmly double tap the earbud in order to activate the feature.
  • Since Tap Control changes the selected earbud’s noise cancellation level to Low, Tap Control only works when the ANC switch on the control module is set to High or Medium. If the switch is already set to Low, Tap Control has no effect.

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided