Back to article
3348
Putting a system into Setup mode
Entering Setup mode lets you connect a device to the Wi-Fi network broadcast by the Bose system. This is useful for system set up and diagnostics.
Enter Setup mode.
If a Bose app or instructions ask you to put your system in Setup mode:
- If an Ethernet cable is connected to the soundbar, disconnect it
- On the remote control, simultaneously press and hold the TV icon and Skip Back buttons for five seconds until he light bar on the soundbar glows amber
- For next steps, refer to the Bose app or instructions that asked you to enter Setup mode.
Was this article helpful?
Thank you for your feedback!