Back to article
3348
Note: Adapters produced after DOM 4286 have a clear plastic lens in front of the indicator allowing the light from the LED to be seen more easily. Adapters produced before this DOM may require looking directly in to the hole to to see the LED.
Understanding LED indicator status lights and information
Find out what the LED indicator light on your product tells you about the status of your product.
SoundTouch Wireless Adapter LED Status Indicator
LED State | Description | |
---|---|---|
Off | The adapter is unpowered, connected via Ethernet or the network is disabled | |
White (blinking fast) | The adapter is attempting to connect to a Wi-Fi network | |
White (slow flash) | The adapter is downloading a firmware update | |
White | The adapter is connected to a Wi-Fi network | |
White (solid 3 sec, double-flash, repeat) | The adapter is installing a firmware update | |
Amber (blinking) | The adapter failed to connect to Wi-Fi / network error | |
Amber (blinking fast) | The adapter has a firmware error | |
Amber (solid) | The adapter is in setup mode broadcasting its "Bose SoundTouch Wi-Fi Network" |
SoundTouch Stereo JC Acoustimass Module LED Status Indicators
LED Color | 1st Blink | 2nd Blink | 3rd Blink | 4th Blink |
---|---|---|---|---|
Off | No power | N/A | N/A | N/A |
Green | Adapter detected | Streaming | ADAPTiQ On | Left channel only |
Orange | Adapter not detected | Not streaming | ADAPTiQ Off | Right channel only |
Green and Orange | N/A | N/A | N/A | Both channels okay |
Was this article helpful?
Thank you for your feedback!