Back to article
3348
*Not mentioned in the quick start guide or owner's guide
Understanding the tones from your product
Your product plays tones or beeps to indicate various product status (i.e. powering on or off, connecting or disconnecting Bluetooth®, low battery, etc.). Find out what the different sounds mean.
| Tone Description | Tone Indication |
|---|---|
| Single beep | Incoming call answered or voice dialing activated |
| Single beep per press. Tone changes when upper or lower volume limit is reached | Volume adjustment |
| Short double beep (descending). Repeats every 30 seconds | Call or streaming audio muted |
| Short double beep (ascending) | Call or streaming audio unmuted |
| Single long beep* | Pairing mode started |
| Two notes (descending)* | Incoming call |
| Two quick notes (descending) | Call ended or incoming call rejected |
| Three quick notes (ascending) | Bluetooth® device connected |
| Three quick notes (descending) | Bluetooth device disconnected |
| Four notes (ascending) | Headset turning on |
| Four notes (descending) | Headset turning off |
| Five-note warble. Repeats every 2 minutes | Low battery |
| Old-style phone ringing | Redialing last number |
*Not mentioned in the quick start guide or owner's guide
Was this article helpful?
Thank you for your feedback!